RT Journal Article SR Electronic T1 A Shielded, Automated Injector for Energetic Beta-Emitting Radionuclides JF Journal of Nuclear Medicine Technology JO J. Nucl. Med. Technol. FD Society of Nuclear Medicine SP 29 OP 32 VO 23 IS 1 A1 Williams, Lawrence E. A1 Ettinger, Lupe M. A1 Cofresi, Enrique A1 Raubitschek, Andrew A. A1 Wong, Jeffrey Y. C. YR 1995 UL http://tech.snmjournals.org/content/23/1/29.abstract AB Objective: Systemic radiation therapy may require the clinical use of relatively high levels (tens of millicuries) of energetic pure, beta-emitting radionuclides such as 32P, 89Sr and 90Y. To deliver such amounts of radioactivity to the patient presents a unique radiation hazard to the staff in nuclear pharmacy, radiation oncology and nuclear medicine due to the brake, or bremsstrahlung, radiation produced in the injection volume and syringe. Methods: We designed a portable shield and automated delivery system which can be operated remotely to perform intravenous or intraperitoneal administration of a given amount of radioactivity and in a fixed period of time. Results: By encasing a 60-cc syringe in 1.4 cm of acrylic and covering that layer with 6 mm of lead, we could reduce the exposure rate to approximately 0.12 mR hr-1 mCi-1 at 5 cm from the side of the device containing a 90Y source. Corresponding exposure rates were 0.027 and 0.001 mR hr-1 mCi-1, at 20 and 100 cm respectively, from the side of the injection syringe. For a 50-mCi clinical injection, we estimated exposure rates of approximately 6 mR hr-1 at 5 cm from a 90Y source enclosed in this prefabricated, portable syringe holder. Conclusions: We recommend that clinics, using high-energy beta emitters for radiotherapy, fabricate acrylic and lead holders for syringes used in the protocols to reduce their staffs’ exposure.